PULPER
We provide range of Hydra pulper that are provisionally engineered and is available at the most competitive prices. Different Pulpers have different benefits. Specific pulper can be decided based on application & customer’s requirement.
HYDRA PULPER
(4% Consistency)
These pulpers are easy to maintain and have low power consumption. These equipment are manufactured using graded material keeping in mind the international industrial standards.
- The Rotor combines Hydrodynamical and Mechanical system for dissolving the pulp.
- The Rotor gives a Higher Flow Vertex of pulp over the perforated screen plate.
- Rotor allows higher pulp Consistency through the screen plates.
- On the back side of the Vanes a under pressure makes the strainer holes cleans and risk of plugging the hole is eliminated.
- Capacity: 5 M3 to 22 M3
D – TYPE HYDRA PULPER
(4% Low Consistency)
D – Type Pulper is specially designed to use old, corrugated boxes and mixed waste. It removed contaminated material at low and medium consistency.
- “D” Type shape creates better vertex of the stock and excellently slashes the paper pulp.
- Easily separates Fibers and minimized Fiber loss.
- Rager system removes light rejects.
- D Pulper system consist of other equipment like Junk Trap, Grapple, Poire Screen, Drum Screen which keeps the pulping operations continued.
- Capacity: 15 M3 to 35 M3
HI – CON PULPER
(16% Consistency)
Hi-Con pulper are designed to use with either a belt drive or a gear drive. As the rotor unit has its own bearings, when using a gear drive, the coupling is connected to the rotor shaft, so the gear has to only sustain torque forces. Fiber to Fiber friction creates excellent De-fiberizing and the requisite Fiber length is maintained.
- Plastic / Films / Hot Melts / Adhesives etc. can be easily removed from the Fiber.
- Hi-Consistency pulper is connected with the Poier. The Poier has dual function of removal of the plastic and other impurities.
- It removes hi consistency pulp with negligible Fiber loss.
- Capacity: 15 M3 to 35 M3
UM / BROKE PULPER
(4% Consistency)
A Broke pulper is used to break down the broke into a stock that can be pumped and treated. It is automatically controlled to have continuous operation both in trims and sheet break cases by adjusting the stock level consistency in the wat and the discharge pump flow rate.
- The drive system can include a gearbox in place of the more common pulley and belt arrangement.
- Horizontal design consumes less energy than a traditional vertical pulper, under the same operating system.
- Low power consumption and high level of reliability.
- Low operating and maintenance cost.
- Capacity: 3 M3 to 12 M3
ATS PULPER
(4% Consistency)
The ATS pulpers are offered by us are ideal for dissolving cellulose wastepaper boards as well as broke from the machine. These ATS pulpers are a continuous type pulper and known for their high performance, reliability and long functional life. Our range is provided in both standard and customized specifications to the clients.
- Used for slashing all types of Paper Waste
- Different sizes available
- Horizontal design consumes less energy than a traditional vertical pulper, under the same operating system.
- Low power consumption and high level of reliability.
- Low operating and maintenance cost.
- Capacity: 5 M3 to 25 M3
